Montgomery Ward 782652, Инструкция по эксплуатации

Страница: 5 / 8

c. Insert a new true HEPA filter (with the ribbons facing you).
d. To close the front cover, ensure the top hooks are properly in place, then
snap the bottom shut.
6. Clean the air quality sensor if the LED remains frozen on one light color.
a. Power off and unplug the unit.
b. Locate the air sensor grill located at the top right front of the unit.
c. Use a vacuum cleaner hose to suction any dust or dirt that may have
accumulated inside the sensor.
1
•
888
•
557
•
3848 Wards.com
8 9
Cleaning & Care (cont.) Cleaning & Care
1. Turn off and unplug the unit.
2. DO NOT use abrasive brushes, pads or harsh cleaning solutions.
3. Wipe the exterior of the housing with a damp cloth, as needed.
4.
DO NOT immerse any electrical appliance, power cord or plug into water.
5. We recommend replacing the filter every 12 months or when the change filter
light comes on. Filter size is 11½" W x 17½" H x 1" D.
a. While facing the front of the unit, grasp the front cover at the bottom
and pull forward. Gently lift the cover up and away from the housing.
b. Remove the true HEPA filter by pulling on the top and bottom
ribbons.