12
ATTACH THE POWER STRIP WITH USB PORTS AND CORD WRAP BRACKETS
WARNING: Do not assemble with the power strip plugged into an active electrical
socket. Do not stick tools or other parts into the electrical outlets.
Insert the power strip with USB ports into the opening. Attach using four M6 x 12 mm
bolts (two on each side of the electrical socket). These bolts will screw directly into nuts
that are welded in place.
Place each cord wrap bracket just above the power strip with the flange facing out.
Line up the holes in the brackets with the holes located just above the power strip.
Secure each bracket with two M6 x 12 mm bolts inserted directly into nuts already
welded in place.
8
16
16
INSTALL THE CASTERS
Position the four casters on the bottom of the cart. Line up the holes in the casters with
the holes in the bottom tray. The two swivel casters with brakes should be positioned on
the same side of the cart as the handle.
Insert four M8 x 12 mm bolts through the bottom tray and into each caster. Secure with
M8 nuts on the bottom of the casters.
Using two people turn the cart upright.
