6
CASTER INSTALLATION
Carefully lay the bottom tray upside down,
with a soft mat underneath for protection.
Be careful not to damage the post support
when you turn over the bottom tray.
Position the two swivel casters on the
bottom of the tray, opposite of the post
support on the left and right side. Insert four
M8 x 20 mm hex bolts through washers,
then through each caster fastening hole and
into the bottom of the tray. Tighten securely.
Repeat for the two rigid casters on the end
of the bottom tray closest to the support
post.
Turn the bottom tray over.
REVOLVING
TOOL ORGANIZER
INSTALLATION
Insert the extension bar into the post
support on the bottom tray. Attach using
two M8 x 70 mm wing bolts and wing nuts.
Tighten securely.
