Montesa COTA 301RR 2023, Руководство пользователя

Страница: 164 / 180

6-9 6-9
Electrical servicing
MIL and DTC (ISO) error codes for the PGM-FI injection system.
y
The PGM-FI MIL denotes the failure codes (the number of blinks from 0 to 54). When the indicator lights for 1.3 seconds, it is equivalent to ten blinks. For example; a 1.3 second
illumination and two blinks (0.5 second x 2) of the indicator equals 12 blinks. Follow code 12 troubleshooting.
y
When more than one failure occurs, the MIL shows the blinks in the order of lowest number to highest number. For example; if the indicator blinks once, then seven times, two
failures have occurred. Follow codes 1 and 7 troubleshooting.
Number
of blinks
(*)
ISO
error codes
(**)
Causes Symptoms
0 No blinks
y
Faulty ECM
y
Engine does not start
No blinks
y
Faulty ECM (PGM-FI warning indicator output)
y
Engine operates normally
Stay lit
y
Short circuit in service check connector
y
Faulty ECM (PGM-FI warning indicator output)
y
Engine operates normally
1 Blink P0160
y
Open or short circuit in MAP sensor line (in the ECM)
y
Faulty MAP sensor
y
Poor idle
7 Blinks P0116
y
Loose or poor contact on ECT sensor
y Open or short circuit in ECT sensor wire
y
Faulty ECT sensor
y
Hard starting at a low temperature
(Simulate using numerical values; 90 ˚ C/194 ˚ F)
y
Cooling fan does not stop
8 Blinks P0121
y
Open or short circuit in TP sensor line (in the ECM)
y
Faulty TP sensor
y
Poor engine response when operating the throttle quickly
(Simulate using numerical values; throttle open 0 ˚ )
9 Blinks P0111
y
Open or short circuit in IAT sensor line (in the ECM)
y
Engine operates normally
(Simulate using numerical values; 25 ˚ C/77 ˚ F)
12 Blinks P0200
y
Loose or poor contact on injector connector
y
Open or short circuit in injector wire
y
Faulty injector
y
Engine does not start
21 Blinks P0130
y
Loose or poor contact on O2 sensor
y
Open or short circuit in O2 sensor wire
y
Faulty O2 sensor
y
Engine operates normally
54 Blinks P1000
y
Loose or poor contact on bank angle sensor connector
y
Open circuit in bank angle sensor wire
y
Faulty bank angle sensor
y
Engine starts but stops after few seconds.
(*) Warning unit
(**) Generic diagnosis tool (DST)