Montesa COTA 301RR 2023, Руководство пользователя

Страница: 152 / 180

5-27 5-27
Frame servicing
(1) OIL BOLT
(2) BRAKE HOSE
(3) BOLT
(4) MASTER CYLINDER
Front master cylinder
Removal/Installation
NOTICE
Avoid spilling brake fluid on painted, plastic or rubber
parts. Place a shop rag over these parts whenever the
system is serviced.
When removing the brake hose bolt, cover the end of
the hoses to prevent contamination. Secure the hoses to
prevent fluid from leaking out.
Drain the brake fluid from the hydraulic system into a
suitable container.
Remove the following:
– Brake lever
– Brake hose bolt
– Master cylinder holder bolt and holder
– Master cylinder
Disassembly/Assembly
NOTICE
y
Keep the master cylinder piston, oil seals, spring and
snap ring as a set; don’t substitute individual parts.
y
When installing the oil seals, do not allow the lips to
turn inside out and be certain the snap ring is fi rmly
seating in the groove.
Remove the snap ring and disassemble the master cylin-
der.
Inspection
Check the following items (page 2-4):
– Master cylinder and piston for scoring, scratches or
other damage
– Master piston O.D. and master cylinder I.D.
Installation
Installation is in the reverse order of removal.
Torque:
Brake hose oil bolt: 14 N•m (1.4 kgf•m, 10.3 lbf•ft)
Master cylinder holder bolt: 5.5 N•m (0.5 kgf•m, 4.1 lbf•ft)
Bleed the air in the front brake system.
4
3
2
1
4 3 2 5 6
1
5
(1) BOOT
(2) SNAP RING
(3) PISTON ASSEMBLY
(4) SPRING
(5) OIL SEAL
(6) CIRCLIP