Monte Carlo Fan Company Hicks 3HCKR60 D Series, Руководство пользователя и инструкция по установке

Страница: 5 / 10

5
11 12 13
15 14
© 2020 Monte Carlo Fan Collections
12/2020
16
Raise canopy to mounting bracket,
aligning loosened screws in mounting
bracket with slotted holes in canopy.
Twist canopy clockwise to lock. Reinstall
screws that were previously removed in
step 3 and then tighten all screw
securely.
Install decorative ring. Align the head of
set screws on the canopy with the groove
in the decorative ring and twist clockwise
till tight.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Attach light pan onto the plate on motor,
Place light pan over the lead wires from
fan, aligning the keyhole slots on the light
plate with the preassembled screws on
the plate. Twist clockwise till lock.
Reinstall the removed screw. Tighten all
screws securely.
Loosen 2 and remove 1 preassembled
screw from the light pan. Save screw.
Connect white wire from fan to white wire
from LED light fixture and then connect
blue (or black) wire from fan to black (or
blue) wire from LED light fixture. Be sure
plugs connection clasped together firmly.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the screw removed on last
installation step. Tighten all screws
securely.
Note
: If you don’t want to install the fan
with LED light, go to step 17 for blanking
plate installation.
Attach glass assembly by locating
dimples in light pan with grooves on the
glass and twist clockwise until tight.
Insert blade into the slot on flywheel.
Install blade with a blade supporting plate
by the screws provided, aligning each of
the holes as shown and tighten all screws
securely. Repeat this process for
remaining blades.
Decorative ring
Groove
Blade
Blade supporting plate
Plate on motor
Glass assembly
Install LED Light Fixture
Led light fixture
Light pan