Monte Carlo Fan Company 5WF52XXD-L Series Fan, Руководство пользователя и инструкция по установке

Страница: 4 / 7

© 2011 Monte Carlo Fan Company
12/30/2011
4
Make wire connections to power source using wire
nuts provided. Make sure that no filiments are out -
side of the wirenut. After making the wire connec -
tions, the wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet bo x and
ungrounded conductor on the other side of the outlet
box.
11
Remove the 3 screws in round holes.
Remove cap by twisting and pulling
down. Save screws.
15
Attach blade brackets to blades
using the blade br acket screws
and washers provided.
13
The screws, washers, and motor
pads are pre-installed to the blade
holders. Attach blade assembly to
motor and tighten screws securely.
14
Connect black and blue wire from fan to Black or (Hot)
wire from house. Connect White wire from F an to
White (Neutral) wire from house. Connect Ground
leads from mounting bracket and downrod to Ground
lead from house.
Refer to Safety Tips section of
manual.
10
House
Fan
Blue
Black
White
Green
Black
White
Ground
Loosen one and remove one pre-
assembled screw from mounting
bracket. Save screw. Lift canopy up,
aligning its keyhole slot with the pre-
assembled screw on mounting
bracket and twist clockwise to lock in
place. Re-install the removed screw
and tighten all screws securely.
12
Tighen keeper nut onto threaded
pipe from the light kit.
Install keeper nut over lead wires.
17
18
Install switch housing to light kit b y
turning clockwise to tighten.
16