background image

Find tabs on light kit pan. Align the

indentions on glass with tabs lift

glass and twist till glass is secure.  

To control fan speed select from High, Medium

or low speed buttons.  To turn the fan off press

the Fan on / off button.  To dim upper lights

press and hold U/L botton.  To dim Lower lights

press and hold D/L button.  To turn off either

up or down light press and quickly release

either U/L or D/L button.  Press button marked

REV to reverse the rotation direction of the fan

blades

Fan speed

control but-

tons

Fan on / off

Transmitte

r on / off

Light dimmer

for up and

down lights

Fan reverse

button

33

37

Install wall control unit to outlet box

using machine screws provided.

Attach front cover to wall control

with screws provided.

35

36

Warning! Hook up In Series Only.  Do

not connect to hot and common wire

of electric circuit or switch will be

damaged.  Refer to diagram obove

black

AC 120V input

34

black

black

black

white

white

ground

Install the 2x50 watt halogen bulbs.

Do not touch bulb glass surface as

oily residue from skin can cause the

bulb to explode.

32

Replace inspection plate from light kit

pan.

31

Содержание 5NCR56 Series







Отзывы: