© 2013 Monte Carlo Fan Company
6/25/2013
6
Remove switch cap housing from fan.
Remove the plug of fitter. Install
switch cap housing to light kit by
turning clockwise to tighten.
29
Install keeper nut over lead wires.
30
Remove nut and save for next step.
28
Tighten keeper nut onto threaded
pipe from the light kit.
31
Install 3 x 60 watt Candelabra base
bulbs.
WARNING:
Over lamping the
fan will result in the fan lights shut-
ting down until the proper wattage
of bulbs are installed.
Reset the lights by turning off the wall
switch, breaker,or by remote. Replace
bulbs with the correct wattage bulbs,
turn the power on.
32
Locate blue and white wire from the fan
marked “For light kit”. Connect blue from fan
to black from light and white from fan to white
from light by pushing connectors together.
33
Attach switch cap to fan by lining up
2 slot ear holes and 1 screw hole and
twisting cap. Then tighten the 3
screws.
34
Install rubber washer and nut to
glass tighten nut.
36
Remove finial nut, finial cap, hex nut,
and washer from fitter.
35
