Receiver learning function (DC motor)
After the fan is powered (DC motor), the receiver will start sourcing the frequency in the
first 60 seconds; during the time, any instruction from the transmitter (pressing any but-
ton) will be recognized and memorized as the ID frequency of the using transmitter; fre-
quencies from the other transmitters won’t be identified as the instruction to operate your
fan. When the power is off and on again, if the receiver does not receive the frequency
from the transmitter in 60 seconds, receiver will automatically use last frequency set
before the power off.
Operation & Installation:
1. Remove the battery cover and the battery from the transmitter, you will see 4 dip-
switches with on/off printing, adjust the dipswitches with your own choice (different com-
binations).
2. Power your fan, use the transmitter to send the signal to the receiver by pressing any
button on the transmitter, the receiver will memorize the frequency from the transmitter
as the ID signal from now.
Tips for end users:
1. Once the power is off from last using and you want to restart your fan, in case there
are two fans or more in your house with the same transmitter and receiver set, REMEM-
BER to wait for 60 seconds before using the transmitter, otherwise it will cause a transmit-
ter to control both fans in the same time.
2. Receiver has the memory function, fan will automatically return to the previous setting
before power off.
3. If you fan is operated automatically after installation, it is because your fan still memo-
rize the previous setting at factory, just simply press the “stop” button on the transmitter
twice to stop your fan.
