5
© 2014 Monte Carlo Fan Company
11/1/2014
13
14
15
16
17
18
Remove shipping stabilizers from motor
assembly.
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Remove 3 set screws from top plate. Keep
screws.
Attach top plate of switch housing onto
the plate on motor, aligning the keyhole
slots on the top plate with the
preassembled screws on the plate. Twist
clockwise till lock. Reinstall the screw
removed in step 14. Tighten all screws
securely.
Attach switch housing onto top plate,
aligning the holes and reinstall the 3 set
screws removed in step 15 and tighten all
screws securely.
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
Place battery cover over battery
compartment and buttons. Place remote
over 2 pins on front cover. Attach cover of
remote by placing over 4 pins and
snapping into place.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save screw
for later use.
Battery cover
Battery
HAND HELD INSTALL
Shipping
stabilizer
Plate on motor
Top plate of switch housing
