© 2013Monte Carlo Fan Company
6/15/2013
3
Before you begin installing the fan, Switch
power off at Service panel and lock service dis-
connecting means to prevent power from being
switched on accidentally. When the service dis-
connecting means cannot be locked, securely
fasten a prominent warning device, such as a
tag, to the service panel.
Before installing this fan make sure the outlet box is
properly installed to the house structure. To reduce
the risk of fire, electric shock, or personal injury,
mount to outlet box or supporting system acceptable
for fan support. (Mounting must support at least 35
lbs.)
2
1
Use metal outlet box suitable for fan support
and use only the screws provided with the outlet
box (must support 35 lbs). Before attaching fan
to outlet box, ensure the outlet box is securely
fastened by at least two points to a structural
ceiling member ( a loose box will cause the fan
to wobble).
Use only the screws provided
with the outlet box.
3
Remove the keeper pin and cross pin
from downrod, and save for later
use.
4
Place canopy over down rod.
5
6
Place Yoke Cover over down rod.
Thread leadwires and safety cable
through the downrod
7
Loosen the 2 screws on the yoke to
allow down rod to slip into yoke.
8
Insert down rod into yoke on top of
the fan body. Align the hole in the
down rod with the hole in the yoke.
Insert the Pin through the yoke and
down rod until the point appears on
the other side.
9
