Monte Carlo Fan Company 4LMR56 D Series, Руководство пользователя и инструкция по установке

Страница: 6 / 10

6
17 18 19
© 2020 Monte Carlo Fan Collections
2/2020
Connect white wire from fan to white wire
from LED light kit and then connect blue
(or black) wire from fan to black (or blue)
wire from LED light fixture.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the light
fixture with the preassembled screws on
the light pan and twist clockwise till lock.
Reinstall the screw removed in step 15.
Tighten all screws securely.
Raise outer light shade, aligning threaded
rod on light fixture with the hole in middle
of the light shade and push up gently
allowing threaded rod to come through
the hole. Install a hex nut and finial with a
rubber washer to fix the light shade as
shown in illustration. DO NOT OVER
TIGHTEN the hex nut and finial as glass
may crack or break.
Align the hole on inner light shade with
the threaded rod on light fixture and
attached it onto light fixture with a nut.
DO NOT OVER TIGHTEN the nut.
Inner light shade
LED light
fixture
Nut
Outer light shade
Finial
Hex nut
Rubber washer