Monte Carlo Fan Company 3VER56XXD Series, Руководство пользователя и инструкция по установке

Страница: 5 / 9

5
© 2011 Monte Carlo Fan Company
3/5/2012
13 14 15
16 17 18
Insert blade assembly into the slot on
flywheel.
Install blade assembly with screws
provided, aligning each of the holes as
shown and tighten all screws securely.
Repeat this process for remaining blades.
Note
: Make sure the side with a label
“This side up” is installed upward.
Attach light pan onto the plate on motor,
aligning the keyhole slots with the
preassembled screws on the plate. Twist
clockwise till lock. Reinstall the screw
removed in step 14. Tighten all screws
securely.
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
Connect white wire from fan to white wire
from light fixture and then connect black
wire from fan to black wire from light
fixture.
Attach light fixture onto light pan, aligning
the keyhole slots on the light fixture with
the screws on light pan and twist
clockwise till tight. Reinstall the screw
removed in step 16. Tighten all screws
securely.
Install 13W CFL medium base bulb. Bulb
included.
WARNING: USE MAXIMU 13 WATTS
MEDIUM BASE LISTED
SBCFL(SELF-BALLASTED COMPACT
FLUORESCENT LAMP) ONLY, NOT DOING
SO COULD CAUSE THE UNIT TO
OVERHEAT AND LEAD TO POSSIBLE
DAMAGE TO THE PRODUCT.
Loosen 2 and remove 1 preassembled
set screws (
Remove the screw which
across from the special set screw. Do
not try to loosen or remove the
special set screw
) from the plate on
motor. Save screw for later use.
Blade assembly
Light pan
Light fixture
Special set screw