© 2013 Monte Carlo Fan Company
7/1/2013
3
Before you begin installing the fan, Switch
power off at Service panel and lock service dis-
connecting means to prevent power from being
switched on accidentally. When the service dis-
connecting means cannot be locked, securely
fasten a prominent warning device, such as a
tag, to the service panel.
Before installing this fan make sure the outlet box is
properly installed to the house structure. To reduce
the risk of fire, electric shock, or personal injury,
mount to outlet box or supporting system acceptable
for fan support. (Mounting must support at least 35
lbs.)
Use metal outlet box suitable for fan support
(must support 35 lbs). Before attaching fan to
outlet box, ensure the outlet box is securley fas-
tened by at least two points to a structural ceil-
ing member ( a loose box will cause the fan to
wabble).
Use only the screws provided with
the outlet box.
3
2
1
Remove keeper from pin.
4
Loosen the 2 set screws in yoke
for downrod to slip into yoke.
5
Thread leadwires and safety cable
first through the canopy disk,
canopy and last the downrod.
6
Canopy disk
Downrod
Canopy
Insert downrod into yoke on top of the Fan
Body. Align the hole in the Downrod with the
hole in the Yoke. Insert the Pin through the
Yoke and Downrod until the point appears on
the other side.
Install the keeper to pin.
7
8
Tighten the 2 set screws on the Yoke
once the downrod is in place.
9
