Monte Carlo Fan Company 3STR60, Руководство пользователя и инструкция по установке

Страница: 4 / 10

4
© 2019 Monte Carlo Fan Company
4/2019
7 8 9
10 11 12
Thread light lead wires over the central
hole of light pan.
Align the keyhole slots on the light pan
with the preassembled screws on the
plate on motor. Twist clockwise till lock.
Reinstall the screw removed in step 6.
Tighten all screws securely.
Connect white wire from fan to white wire
from LED light fixture and then connect
black (or blue) wire from fan to blue (or
black) wire from LED light fixture.
Note
: If you don’t want to install the fan
with LED light, go to step 12 for blanking
plate installation.
Align the holes on the LED light fixture
with the screw holes in the posts on the
light pan.
Install it with set screws provided.
Note : In case replacement of LED light
fixture is needed. Remove the 3 black set
screws.
Attach glass by locating dimples in light
pan with slot on the glass and twist
clockwise until tight.
Isolate the quick connects with electrical
tape.
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note : Do not install LED light kit if
use blanking plate.
Light pan
Lead wires
1
2
Install LED Light Fixture
LED light fixture
1
2
Glass
Install Blanking Plate
1
2
Post