Monte Carlo Fan Company 3KNR52XXD Series, Руководство пользователя и инструкция по установке

Страница: 6 / 9

6
© 2013 Monte Carlo Fan Company
10/1/2013
19 20 21
22
23
24
Attach glass to light pan by locating
dimples in LED light fixture with grooves
in glass and twist clockwise until tight.
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
Setting the reverse switch in the right
hand side will result in downward airflow
and setting the switch in the left hand
side will result in upward airflow.
Note
: Reverse switch must be set either
way completely. If the reverse switch is
set in the middle position, fan will not
operate.
Place battery cover over battery
compartment and buttons. Place remote
over 2 pins on front cover. Attach cover
of remote by placing over 4 pins and
snapping into place.
Install wall control unit to outlet box using
machine screws provided.
Attach front cover to wall control unit with
screws provided. Snap battery cover in
place
Battery cover
Battery
WALL MOUNT INSTALL
HAND HELD INSTALL
Reverse switch
Glass
LED light
fixture
Dimples
Grooves