Monte Carlo Fan Company 3BTR54 Series, Руководство пользователя и инструкция по установке

Страница: 7 / 11

7
© 2018 Monte Carlo Fan Company
08/2018
REMOTE CONTROL SETTING (Dimming/Non Dimming)
Dimming Non Dimming Setting
The remote controller is set with dimming function at
factory.
The “DIM” selection is the light dimmable selection.
If you would make the light with on/off feature, remove
the rubber plug from the receiver and switch it to
ON/OFF position. Replace the rubber plug.
The “ON/OFF” selection to make light ON/OFF only
(non-dimming function) (Fig. 1 )
Caution
: If the remote receiver has been wired with fan,
turn power off by wall switch before switch “DIM” and
“ON/OFF” selection.
DIM
ON/OFF
Fig. 1
Wall cradle installation
Install Transmitter wall mount cradle with 2 screws provided
as shown in Fig. 2.
Install wall cradle with the direction as shown on back side of
the cradle.
Useful tips:
Take remote transmitter up by pushing it at lower area of the
transmitter.
The remote transmitter can be held on magnetic metal
material by a magnet built in the transmitter.
Back side of the
wall mount cradle
Fig. 2
Rubber plug