Monte Carlo Fan Company 3BTR54 Series, Руководство пользователя и инструкция по установке

Страница: 5 / 11

5
© 2018 Monte Carlo Fan Company
08/2018
13 14 15
16 17 18
Lift Canopy allowing the 2 studs to protrude
through the canopy.
Install knurled nuts as shown. Tighten the
knurled nuts securely. The canopy should
adjust for any irregularity in the ceiling or
Outlet box.
Make sure the studs protruding from the
bottom of the Mounting bracket are installed
with threads all the way through the bracket.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Connect white wire from fan to white wire
from LED light fixture and then connect
blue (or black) wire from fan to black (or
blue) wire from LED light fixture.
Attach light pan onto the plate on motor,
aligning the keyhole slots on the light pan
with the preassembled screws on the
plate. Twist clockwise till lock.
Reinstall the screw. Tighten all screws
securely.
Remove 3 set screws from light pan.
Keep screws.
Attached inner shade onto the light pan.
Align the holes on inner shade with the
screw holes on the light pan.
Install it onto the light pan with 3 set
screws removed in the installation step
17.
Insert blade into the slot on flywheel.
Install blade with screws and washers
provided, aligning each of the holes as
shown and tighten all screws securely.
Repeat this process for remaining blades.
Note
: Make sure the side with a label
“This side up” is installed upward.
Stud
Blade
Plate on motor
Light pan with
LED light fixture
Inner shade
Light pan
This side up