Montarbo NM 815, Руководство пользователя

Страница: 23 / 36

NM815 | owner ’ s manual
23
3
2 1
tip ring sleeve
(GND)
tip
ring
sleeve
(GND)
1
2
3
CONNECTION TO MIxER
If the mixer has XLR balanced outputs: use standard balanced XLR connectors.
If the mixer has XLR unbalanced outputs: in this case, unless using a Montarbo mixer, make sure that the XLR outputs on the mixer are unbalanced
to IEC 268 standard 1 = GND, 2 = HOT, 3 = GND.
3
2 1
3
2 1
1
2
3
1
2
3
If the mixer has JACK balanced outputs (stereo jacks): it is possible to use stereo jack-XLR adapters, wired according to IEC 268, pin 1 = ground
(sleeve), pin 2 = tip, pin 3 = ring.
If the mixer has JACK unbalanced outputs (mono jacks): use suitable Jack-XLR male adapters unbalanced according to IEC 268, pin 1 = ground, pin
2 = tip, pin 3 = ground.
3
2 1
3
2 1
1
2
3 1
2
3
3
2 1
tip sleeve
(GND)
tip
sleeve
(GND)
1
2
3
3.3.2 speakON
®
connector wiring
In order to connect the NM8Bi satellites to the NM15SA bass cabinet use
the provided cables.
In case new cables are required, make sure specifically
unshielded cable (specific for loudspeakers) featuring good quality and
4 x 1.5 mm
2
section, at least. Connectors should be as following:
Pin 1+ positive woofer, Pin 1– negative woofer,
Pin 2+ positive HF driver, Pin 2– negative HF driver.