RMD801 - RMD801BH
| Owner’s manual
9
7
BODYPACK TRANSMITTER
C
A
1
2
3
4
B
6
5
7
1
Antenna
This permanently attached transmitter antenna should be fully extended during normal operation.
Status Indicator
This LED displays the operation mode:
- GREEN: Normal Operation
- RED: Mute
- Flashing RED: Low Battery
POWER/MUTE Switch
Press and hold to turn the unit on or off.
Press and release to mute or unmute the the transmitter.
MINI 4P Connector
Pin 1: GND
Pin 2: Phantom power supply for condenser microphone
Pin 3: For guitar, bass and keyboards
Pin 4: For dynamic or condenser microphone
IR Receiving Section
This window is used to capture the infrared signal sent from the receiver during the IR SET to channelize the transmitter.
Input GAIN Control
This control adjusts the transmitter input sensitivity to work with microphone and instruments inputs. For optimal
performance, using the included screwdriver, set the input GAIN control to where you see receiver PEAK indicator
start to light under high levels, then turn down slowly until the PEAK light stops lighting.
Driver
Designed for use in adjusting the transmitter input GAIN control.
1
2
3
4
5
6
D
C
A
B
D
