RMD2400 - RMD2400HD
| Owner’s manual
7
RMD2400 - RMD2400HD
RECEIVER INSTALLATION
Location
For best operation the receiver should be at least 1 meter above the ground and at least 1 meter away from a wall or
metal surface to minimize reflection. Keep the receiver antenna away from noise sources such as other digital equipment,
microwave ovens, as well as away from large metal objects. Keep
RMD2440
receiver 9 meters away from wireless access
points.
Output Connection
There is one audio output on the rear panel: unbalanced 1/4” TRS phone jack. Use shielded audio cable for the connection
between the receiver and the mixer or speaker.
Power Connection
Connect the supplied power adapter to the DC power input on the back of the receiver. Please keep the plug from being
detached by an accidental tug on the cord.
The receiver has no power Off / On switch.
The receiver will be energized whenever the power adapter is connected and
plugged into the AC outlet. Unplug the power supply from the AC outlet when the system is not in use-both for safety
and conserving energy.
Antenna
Rotate the permanently attached antenna vertically to get the best reception.
RECEIVER CONTROLS AND FUNCTIONS
Antenna
Position the antenna vertically.
LEVEL Control
- Adjust the volume
- Indicate pairing status: on --- connected with RMD2410 transmitter
off --- not connected with any device
blinking --- in pairing status
PAIR button
- Indicate the receiver is on by lightening.
- Press and hold for about 5 seconds to enter in pairing status.
Power input jack
connect the DC plug with the supplied in-line AC adapter.
UNBALANCED OUT
Unbalanced audio output jack: 1/4” TRS phone jack which can help to output.
1
2
3
4
5
