REBEL
|
Owner’s manual
9
English
mp3 pLaYER sEctIon
USB/SD DIGITAL PLAYER
This section allows you to manage the signals from the connected USB port and/or SD card input. Please note that you can adjust this
section volume using the MP3 VOL knob in Master section or using the provided remote control.
The 2 row 16-characters display allows you to carefully check all the content of the digital device.
You can remotely control your REBEL using the provided remote control, or other devices like smart-phones.
KEYS
MODE
it displays “S” for SD card playback, “U” for USB playback, or “Connected” for Bluetooth connection.
By pressing this key for three seconds, the player will be turned off!
PLAY/PAUSE
it allows you to play the player; pressing two times this key, the player will be paused
STOP
it stops player playback
REPEAT
press this key to repeat all songs in numbering order
PREV
to move the player to previous song
NEXT
to move the player to next song
USB/SD
The upper slot is for SD card. The lower port is for USB device connection.
connEctoRs
RETURN MAIN IN
This 6.35mm (¼”) connector can be used for any external sound source, which will be directly addressed to MASTER section. Please
note that there’s no level control, so you must adjust the level from the output of the source.
You can connect here the output of a external digital effects unit, or the signal from a sub-mixer which manages further signals to be
blended with Rebel mixer, thus being amplified by your REBEL.
PRE SEND OUT
This 6.35mm (¼”) unbalanced connector can be used to send your REBEL mix to any external device. Please note that overall level will
be adjusted by MASTER knob.
You can connect this output to any external unit, like a recorder or a different sound system which will diffuse your REBEL mix in
different rooms.
EFFECT F. SWITCH
This 6.35mm (¼”) connector allows you to switch on/off the effect section, allowing you to remotely do an “hand-free” operation.
Connecting a foot-switch is very useful when playing an instrument or when you’re far from the mixer.
AUX OUT 0dB
This 6.35mm (¼”) connector can be used to send your Rebel mix to any external sound device. Please note that this output level is
adjusted by AUX OUT VOL knob.
You can connect this output to any external unit, like an external effects unit, a recorder or a different sound system which will diffuse
your Rebel mix in different rooms.
PHONES
This stereo 6.35mm (¼”) connector can be used to connect your headphones to check Rebel mix. Please note that your headphones
level will be adjusted by MASTER knob.
IR LED
This LED detects the provided remote control signal, allowing you to do several MP3 player operations, please see the relevant chapter
(page 4).
12
13
14
15
16
17
18
19
20
