owner
’
s manual |
F15CxA
46
Each Montarbo speaker system that use the Montarbo USBnet protocol for remote
control has, permanently written in the internal DSP's software, a unique ID (name) in
the hexadecimal format 'Hxxxxxxxxxxxxxxx', that will distinguish it from all the others (a
digital 'serial number').
To start building the speaker's list, click on the
StartAW
button (top left).
A small window will open to ask for a confirmation.
Click
OK
if you really want to build a new list, otherwise click Cancel.
After clicking OK, the program's windows will be empty. To register a speaker in the list,
you need to turn-on the mains power (one speaker at time)
The speakers will send their ID to the program, which will register them in the list and will
display their ID in the upper left window.
When done with the last networked speaker, click on StopAW to end the process.
The program has now built a speaker's list and the display will look like the following
screen.
NOTE: the maximum number of speakers that may be controlled by the
RAConLS™ program is 10.
RAConLS
™
software
BUILDING THE SPEAKER'S LIST
