23
MGX75
ENGLISH
REV: 04_07_2022
www.montanarigiulio.com
2. Place the two extremities of the mechanism levers release in the holes of the
brake as shown in the figure below.
7.3 Connection of the hand release lever for machine room use and rescue
system performance
IMPORTANT: during normal operation the flywheel must not be installed; use
the flywheel only to perform the emergency rescue system.
To slow down the car, it’s recommended to connect the phases together (short
circuited connection).
Connection and installation must be carried out in such a way that the lever and
the flywheel can be operated simultaneously. Fig. 22.
This allows you to perform the rescue system operation correctly.
1. Place the flywheel into the appropriate hole as shown in the figures 20 - 21.
1. Flywheel for rescue
system (MR)
2. Arm for fixing
the flywheel
3. Flywheel installed and
ready for rescue system
operation.
4. Levers for rescue
system connected to the
brake levers.
Fig. 20
Fig. 21
Fig. 22
