ENG
3
STEP 1A
Mounting to the Wall (Drywall)
IMPORTANT!
For safety reasons, this mount must be secured to at least two
wood studs no less than 16” apart. The studs must be capable of supporting
the combined weight of the mount and display.
1. Use a high quality stud finder to locate two adjacent studs where you wish to
install your mount. Mark both edges of each stud to help identify the exact
center.
NOTE:
You must use the center of each stud to avoid cracking or splitting the
wood during installation.
2. Place the wall plate against the wall over the marked studs and level it using
the integrated bubble level. The bubble level is attached to the upper part of the
mount.
3. While another person holds the wall plate in position, mark four locations
(two per stud) for securing the mount to the wall (see Fig. 1).
4. Set the wall plate aside and drill a 6 mm (1/4”) pilot hole at each marked
location.
5. Place the wall plate back against the wall and attach it using the M8 x 63
screws (A) and M8 washers (B) provided (see Fig. 2).
Do not over-tighten
these bolts and do not release the wall plate until all bolts are in place.
Ensure that the wall plate remains level after all bolts are secured.
Fig. 1
Fig. 2
