MONSTERMOUNT MB-1003 Скачать руководство пользователя страница 7

WARRANTY

Monster Mount is liable for unit quality and functions and guarantees 
that the unit is free from production defects for the period of 3 years 
after sales date. In case any defects will occur during warranty period, 
Monster Mount will replace the unit free of charge under below terms 
and conditions.

WARRANTY TERMS

1. Defected unit has to be returned to the sales point, where it was 
bought. Transportation fees, which can occur to return the unit back to 
sales point, are on buyer's account.

2. Any claims under warranty can be made only upon purchase receipt 
presentation.

3. Warranty is not valid in case of:

  the unit was assembled not in accordance with installation 

instructions; 

  repair or modification was done by companies, without Monster 

Mount authorization;

  defect appeared due to fire, flood, lightning, deforming cleaning, 

extremely high temperature, solvent, acids, wrong use or careless 
terms;

  the products have been lost, damaged by misuse, abuse or acci-

dent.

Monster Mount shall not be responsible or liable for injuries or property 
damage, direct, indirect or consequential, which may arise from the 
inability to use this product safety properly, and in the manner for which 
it has been designed and manufactured. 

Product can be used within 10 years at least.

Содержание MB-1003

















Отзывы: