Monster JP 900, Инструкции и информация о гарантии, Страница: 13 / 56

ENGLISH
SYMPTOM POSSIBLE CAUSE REMEdY
The surge protector is not
receiving power.
The surge protector is not turned On.
Too many devices are connected, causing an overload,
tripping the Circuit Breaker.
• Turn the surge protector switch on.
• Make sure the surge protector’s AC power plug is plugged into a properly grounded 120 volts (nominal)
wall outlet.
• In some households, a wall switch may need to be thrown to make the wall plug active. Try turning on the
light switches located near the wall unit.
• Press the surge protector main power switch to “OFF” and then again to “ON” to reset.
Component is not receiving power. The surge protector is plugged into a Switched outlet, but power
on the component is not On. In some instances, a component
plugged into a switched outlet won’t receive power when the
surge protector is turned On unless the component power is
also switched On.
• Turn the surge protector On.
• Turn On the component plugged into the Switched outlet.
Speakers emit a humming
or buzzing noise.
The surge protector is sharing AC power with equipment
that is not properly grounded.
• Connect your surge protector to a dedicated outlet.
• Try unplugging different components from the surge protector one at a time to see if the noise stops.
• Make sure all components are plugged into surge protector.
“Ground OK” Diagnostic Indicator Light
does not come on.
Make sure surge protector is plugged into grounded outlet. Contact a qualified electrician to check outlet(s) for proper grounding.