Do you have questions? Call us @ 877.778.6937 Monday – Friday, 8am-5pm EST
2021 Monster Tower All Rights Reserved 2640 Byington Solway Rd, Knoxville, TN 37931 877.778.6937 monstertower.com
c
DES-192
REV 1.0
4
Step 1:
Installing Hardware to Rear Legs
Step 2:
Installing Hardware to Front Legs
40”
17”
Measure up to 40” and that
is where the bottom hole will
be mounted. The 90 Degree
Swivel Mount will face
outwards and follow the curve
of the tower. Use #10x3/4
self-tapping screws. Thread
side faces outside.
Measure up to 17” and that is where
the bottom hole will be mounted.
The strap eye will be attached facing
upwards on the leg. Use #8x3/4 self-
tapping screws.
Repeat this process on the other leg starting back at Measuring Guide through Step 1.
Repeat this process on the other leg starting back at Measuring Guide through Step 2.
ON THE UNDERSIDE, measure up
to 38” and that is where the bottom
hole will be mounted. The Swivel
Mount will be attached in the center
of the leg.
38”
1.
1.
2.
Hardware Needed:
CEN
TER
O
F
PIP
E
CEN
TER
O
F
PIP
E
OUTSIDE
INSIDE
OUTSIDE
INSIDE
CEN
TER
O
F
PIP
E
OUTSIDE
INSIDE
Hardware Needed:
