Page 6
Step 7: Installing the cover panels
Install the base cover panels as the last step of your installation. The pegs should align with the white insert
holes on the cast base. Apply enough pressure so that the peg fits fully into the insert.
Using your new HS1 Wakeboard Tower
–
Operating Instructions
The HS1 tower easily folds for storage. To fold the tower, remove the quick release knobs and slowly guide the tower to
the folded position.
When the tower is folded, always use a vest or other cushion to protect your
boat where the tower and boat touch.
IMPORTANT
–
The tower cannot be towed when folded. The tower must be
in the upright position when being towed.
After towing and before every use, please check and tighten bolts and nuts
when necessary.
The HS1 tower is silent by design. If you hear any rattling or noise from the
tower, or see any movement in the tower, stop and check all hardware for
tightness. Call us at 877-778-6937 if this does not correct the problem.
Always understand and follow the warnings on the tower label!
