for next panel
(green out)
STEP 3
Remove the panel, leaving the bracket in place on the wall.
Press firmly
on the bracket for 10 seconds to ensure a strong hold.
PRESS FIRMLY
for 10 sec
STEP 4
Attach more connectors with the
GREEN
side out as needed for
the design. Make sure to insert each connector fully into the slot.
remember your
design idea
NOTE:
Once additional panels have been added, take extra care to hold
down neighboring panels when removing one.
(example)
DESIGN TIP:
Pointing the directional markers on the back of each panel towards or away
from each other will create different lighting effects when panels are
combined. Check that it is pointing in the right direction for your design.
directional
marker
4
3
