GREEN always
points AWAY
from controller
STEP 5
With new connector cable(s) installed, attach the open
GREEN
plug from the last segment. and return your segment to the wall
by centering it over the mounting bracket so it snaps into place.
STEP 6
Build out your Digit pattern by repeating these steps with
more segments and connectors, moving away from the controller.
NOTE:
Make sure all connections
are secure.
NOTE:
When making a loop there
will be one pair of panels that will
not be linked by a connector, this
ensures that the power flows
evenly throughout the design.
ENJOY!
If your controller
is already paired,
you’re done!
connector
for next segment
(green side out)
5
4
