PRESS
GENTLY
INSTALLATION
STEP 1
Before installing anything, try out different shapes and patterns
with your panels on the floor or a large table to decide what you
would like to create!
Consult the Design Guide for ideas.
STEP 2
IMPORTANT:
• For best results, don’t disconnect the
controller from the first segment that you
already have installed.
• To ensure all segments light up, make
sure all the connectors always point the
GREEN side
AWAY
from the controller.
• Only one
GREEN
plug should ever be
connected to a single segment at a time.
First, clean the mounting surface with rubbing alcohol and let dry.
When you’re ready to start, peel off the adhesive backing from one
Digit segment, place the segment on the wall less than 3 inches
away from the last segment, and press gently on the center.
examples, starter kit + 1 add-on pack:
GREEN always
points AWAY
from controller
RED always
points TOWARDS
controller
2
3
