C) Set Outlet Pair to "Switched On After Delay":
D) Set the Outlet Pair to "Unswitched (Always On)":
Note:
Press "MENU" until the display shows the status of AUDIO outlet pair.
Press "SET" button until the DELAY TIME changes to the desired DELAY TIME in second(s) before this outlet pair will turn
on after the "ON/OFF" button is pressed, the display will shows figure 4.
When the PowerSource is switched on by pressing the front panel ON button or by external signal, the outlet pair will be
"live" after a delay set by the DELAY TIME-20 seconds in this case. The outlet pair which has maximum DELAY TIME
setting will be turned off immediately once the PowerSource is switched off by pressing the front panel ON/OFF button or
by external signal.
Press "MENU" button until the display shows the status of AUDIO
outlet pair. Press "SET" button until the display shows will shows figure 5.
Once the "Unswitched" is set (whether you turn your PowerSource on or off) any component plugged into these outlets
can receive power continuously, as long as your PowerSource is plugged into a 120 volt wall socket.
The unit is shipped with all outlet pairs set to "Switched On".
Figure 4
Figure 5
7
