Page | 8
35HP
–
Op Manual Rev 0 3/28/12
All specifications are subject to change without notice.
STEP 3: (D) Install Safety chains to Draw Bar w/
(2) ½”x 5½ ” bolts & (4) ½” flat washers and
(2) lock nuts
STEP 4: (A) Install (2) 2 ½ Bearings onto stack mounting plates using (4)
1/2”
x 1 ¼
”
bolts
, (4) 1/2”
lock washers, (4) 2 ½” nuts
(B) Install vertical Debris Stack w/Boom mounts positioned on right rear to impeller housing
(12) 3/8”x 1 ¼” bolts (24) flat washers (12) 3/8” lock washers (
12
) 3/8” nuts
Assembly Instructions, cont.
Solutions
A
A
B
