Operating Controls and
Throttle
Front Brake Lever
Ignition Key Switch
Engine Stop Switch
Component Locations
Operating Controls 6
Fuel Valve
Air Filter
Drive Chain
Side Stand
Shift Lever
Battery
Rear Brake Pedal
Choke Lever
Kickstarter
Spark Plug
Your Monster Moto Pitt Bike is shipped with the handlebars NOT bolted on.
Attaching The Handlebars
Mounting bolts
and lock nuts.
To attach the handlebars follow the steps below:
1. After unpacking your pitt bike, stand it on the side stand on
a flat level surface.
2. Unscrew the screws from the handlebar clamps and set aside.
Remove upper clamp.
3. While sitting on the bike, place the handlebars in the lower clamp in
a comfortable position, being careful to center in the clamps.
4. Replace upper clamps and bolts and tighten to 18 foot lbs with the
wrench provided. Caution: do not overtighten.
When you ride a motorcycle off-road, you need to
be able to operate the throttle, brakes, and other
controls without stopping to look at them. Please
read this section carefully before you ride your
motorcycle. This section of the manual will describe
the function, location, and operation of all the basic
controls of your motorcycle.
855-833-6483 OR EMAIL US AT