25
Q6: The model appears very "stringy".
A6: Ensure that the filament diameter is set to match your filament (1.75mm), then try
recreating the gcode file again. Ensure that the extruder and build plate temperatures
are set to the correct values for the type of filament being used.
Q7: The print stops somewhere in the middle.
A7: Ensure that the gcode file is complete and is not corrupt. Check the original model
file.
Q8: The motor does not stop at the end of the axis.
A8: Check that the stop micro switches are aligned with the motor mount and are
registering.
Q9: The extruder and/or build plate do not move.
A9: Disable the stepper motors and verify they the part can be moved. Clear anything that
is blocking the path. Ensure that the motor is turning using the Utilities menu. If the
motor turns but the belt does not, you will need to tighten the motor gear nut.
Q10: The printer isn't turning on.
A10: Verify that the power cord is fully inserted into the printer and that it is plugged into
a live AC power outlet.
Q11: The SD™ card is not showing.
A11: Navigate to the SD Card menu, then select Unmount SD Card. After the card is
finishing unmounting, select the Mount SD Card option. The card should now show in
the menu.
Содержание MP Maker Pro Mk.1
Страница 1: ...MP Maker Pro Mk 1 P N 33013 User s Manual ...