Monoprice IC212W, Руководство пользователя

Страница: 8 / 51

Plug & Play Wireless Day and Night NetworkCamera
8
ceiling.
2. Power jack – this DC connector is where the external power adapter attaches to
the IP CAM. The IP CAM requires a power level of 5 VDC/1.0A. Do not use any
power source other than the supplied power adapter or an exact equivalent.
3. Ethernet jack – this standard RJ-45 jack is for making a wired Ethernet connection.
When the Ethernet link is ok, the blue Ethernet indication LED on the front side will
be steadily on (when no activity is present) or blinking (when data packets are
being transferred).
4. Reset button – pressing this button resets the IP CAM to the default factory
settings. The button is slightly recessed, so you will need a small object, such as a
pen tip or toothpick, to press and hold the reset button for at least 4 seconds to
activate the reset function. Please refer to section 3.18 for more details.
5. Antenna jack (for IP Cam
(
w
)
only) – this RP-SMA screw jack is where the wireless
antenna attaches to the camera. The antenna must be properly attached for
802.11b/g wireless connectivity. However, if using only a wired connection the
antenna can be left unattached.
Figure 2-2: Major components, back view
2.2. Quick Installation and Usage
There are only three things that you need to do to view the video from the IP CAM.
1. Connect the IP CAM to the home/office network.
2. Install the CamView software on the notebook/PC.
3. Key in the ID/password of the IP CAM (from the included ID/Password card) into
the CamView software, and then you can access the camera and view video.
First, connect the IP CAM to the home/office network
First connect the IP CAM accessories to the IP CAM body correctly, including the
antenna, bracket, power adapter, and Ethernet cable, as shown in Figure 2-3.
Connect the other end of the Ethernet cable to the network, usually by plugging in to a