Monoprice Delta Pro, Руководство пользователя

Страница: 9 / 16

9
General Slicer Settings
If using any other slicer besides KISSlicer, you can follow
these guidelines and the guidelines on the Delta Pro webpage
to configure your preferred slicing software for use with your
machine. For the latest profiles and tips, please check the
product’s webpage and Facebook page regularly.
Machine Settings:
• Build Plate / Bed Diameter: 270 mm
• Build Envelope Height: 340 mm
• Firmware: 5D Absolute E
• File Extension: .gcode
• Fan On: M106 / Off: M107 (Fan can do PWM or blip to speed)
• Maximum Recommended Speed Settings:
• Bottom, Top, and Perimeter: 30 mm/s
• Loops and Infill: 60 mm/s
• Travel: 100 mm/s
• Z-speed: 50 mm/s
• Max Acceleration: 1000 mm/s
• For G-code pre-, and postfixes, visit the Delta Pro webpage
SLICING AND PRINTING
General Settings
(Note: These are general settings guidelines and fine
adjustments WILL need to be made for different materials):
• Extrusion Width: 0.4 mm
• Min. Flow Rate: 1 mm3/s
• Max. Flow Rate: 4 mm3/s
• Destring/Retraction Distance: 3-6 mm
• Destring/Retraction Speed: 100 mm/s
Selecting a File
To select a file, tap , then use the arrows to highlight your file,
ten tap
OK and then tap Yes to begin printing.