6
USB power source. The Bluetooth® LED will illuminate solid red
while charging is in progress.
4.
Battery charging will take about 2 hours for a full charge. Once the
battery is fully charged, the Bluetooth LED will change from solid
red to solid blue.
BLUETOOTH PAIRING
Perform the following steps to pair the headphones with a mobile device.
Note that these headphones can be paired with up to two devices at the
same time.
1.
Press and hold the Bluetooth Button for 3 seconds to power the
headphones on. The Bluetooth LED will flash blue three times, then
will alternately flash red and blue, indicating that they are in
Bluetooth pairing mode.
2.
Open the Bluetooth settings on your mobile device and search for
nearby Bluetooth devices. Locate and select the MP39160 entry.
The headphones will say Connected, and the Bluetooth LED will
flash blue once every 5 seconds.
Notes:
•
If pairing is not completed within 90 seconds, the headphones will
go into standby mode and you will need to repeat the process.
•
To pair a second device, turn off the first paired device or move it
out of Bluetooth range, then repeat the above steps to pair the
second device.
