6
and hold the SOURCE/AUTO-3s button for at least 3 seconds to turn Auto Switching
ON.
5.
VOLUME DOWN: Press the VOLUME DOWN button to decrease the output volume
level.
6.
VOLUME UP: Press the VOLUME UP button to increase the output volume level.
7.
IR LEARNING: Press the IR LEARNING button to enter IR Learning mode.
8.
DISPLAY ON: Press the DISPLAY ON button to turn the connected display on. The
LED to the left of the button will illuminate green.
9.
DISPLAY OFF: Press the DISPLAY OFF button to turn the connected display off. The
LED to the left of the button will illuminate green.
10.
OUTPUT RES: Momentarily press the OUTPUT RES button to display the OSD
Resolution Menu. Momentarily press the OUTPUT RES button again to move the
highlight down through the list. Once the desired resolution is highlighted, press
and hold the OUTPUT RES button for at least 2 seconds to set the output resolution
to the highlighted value. Press and hold the OUTPUT RES button for at least 5
seconds to reset the output resolution to 720p@60Hz.
11.
FW: Micro USB port for performing firmware updates.
Rear Panel
1.
HDMI OUT: HDMI® output port for connecting an HDMI display.
2.
HDMI IN: Two HDMI ports for connecting two HDMI video source devices.
3.
DP IN: DisplayPort connector for connecting a DisplayPort video source device.
4.
VGA IN: VGA port for connecting a VGA video source device.