15
IR Learning
Perform the following steps to configure the DISPLAY ON and DISPLAY OFF buttons using
the display's IR remote control.
1.
Press the IR LEARNING button to enter IR Learning mode. The DISPLAY ON and
DISPLAY OFF LEDs will both illuminate.
2.
Press the DISPLAY ON button. The DISPLAY ON LED will start to flash.
3.
Point the display's IR remote at the IR receiving window on the front panel, then
press the Power On button on the remote. The DISPLAY ON LED will turn off.
4.
Press the IR LEARNING button again to re-enter IR Learning mode. The DISPLAY ON
and DISPLAY OFF LEDs will both illuminate.
5.
Press the DISPLAY OFF button. The DISPLAY OFF LED will start to flash.
6.
Point the display's IR remote at the IR receiving window on the front panel, then
press the Power Off button on the remote. The DISPLAY OFF LED will turn off.
7.
Press the DISPLAY ON and DISPLAY OFF buttons to verify that they turn the
connected display on and off.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [email protected]
