CAUTION
: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent
electromagnetic interference with
electric appliaces, such as radios and televisions, use shielded
cables and connectors for connections
The exclamation point within an equilateral triangle
is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" levels within the
product's enclosure, which may be of sufficient magnitude to constitute a risk of electric shock.
READ INSTRUCTIONS:
All the safety and operating instructions should be read before the product is operated
.
RETAIN INSTRUCTIONS:
The safety and operating instructions should be retained for future reference.
HEED WARNINGS:
All warnings on the product and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS:
All operating and use instructions should be followed.
CLEANING:
The product should be cleaned only with a polishing cloth
or a soft dry cloth.
Never clean with furniture wax,
benzine, insecticides, or other
volatile liquids since
they may
corrode the cabinet.
ATTACHMENTS:
Do not use attachments not recommended by the product manufacturer as they may cause hazards
.
WATER AND MOISTURE:
Do not use this product near water or other moisture or in condensing humidity environments, such as a closed room with hot water running.
ACCESSORIES:
Do not place this product on an unstable
cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child
or adult and serious damage
to the
product. Use only with a
cart, stand, tripod, bracket, or table
recommended
by the manufacturer or sold with
.
A
ny mounting of the product should follow
the manufacturer's
instructions and should
use a mounting accessory
recommended by the manufacturer.
CART:
A product and cart combination should be moved with care. Q
uick stops, excessive force, and uneven surfaces
may cause the product and cart combination to ove
r turn.
See Figure A.
VENTILATION:
Slots and openings in the cabinet are provided for
ventilation, to ensure reliable operation of the product, and to protect
it from overheating
. These openings must not
be blocked or covered. Do not place the product on a bed, sofa, rug, or other similar surface. This product should not be placed inside a cabinet or case unless proper
ventilation is provided.
POWER SOURCES:
This product should be operated only from the type of of power source indicated on the marking label
.
If you are not sure of the type of
power to your home, consult an
electrician or your local power company.
LOCATION:
The appliance should be installed in a stable location.
NON-USE PERIODS:
The power
cord of the appliance should be unplugged from the outlet when left unused for a long period of time
.
GROUNDING OR POLARIZATION:
- If this product is equipped with a polarized alternating current line
plug (a plug having one blade wider than the other), it will fit into the out-let only one
way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an
electrician to replace the obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
-
If this product is equipped with a three-wire grounding type plug (a plug having a third/grounding pin), it will only fit into a grounding type power outlet.
This
i
s a safely feature.
If you are unable to insert the plug into the outlet, contact an electrician to replace the obsolete outlet.
POWER
CORD PROTECTION:
Power supply cords should be routed
so that they are not likely to be walked on or pinched
by items placed upon or against them. Pay particular attention to
the
routing of cords at plugs, convenience receptacles, and the points where they exit from the product.
OUTDOOR ANTENNA GROUNDING:
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is
JURXQGHGVRDVWRSURYLGH
some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
i
nformation
with
regard to proper
grounding of the mast and supporting structure
, grounding
RIWKHOHDGLQZLUHWRDQDQWHQQD
discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection t
o grounding electrodes, and requirements
or
the grounding
electrode. See Figure B
.
LIGHTNING:
For added protection for this product
during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the
antenna or cable system. This will prevent damage to the product to lightening and power-line surges.
POWER LINES:
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuit
s or
where it can fall into power lines or circuits.
When installing an outside antenna system, extreme care should be
taken to keep from
touching such power lines or circuits as contact with them might be fatal.
OVERLOADING:
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric
shock.
OBJECT AND LIQUID ENTRY:
Never push objects of any kind into this product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product
.
SERVICING:
D
o NOT
attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other haz
ards.
Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE:
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions
:
-
When the power
supply cord or plug is damaged
.
-
If liquid has been spilled
or objects have fallen into the product
.
-
If the product has been exposed to rain or water
.
-
If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions
as an improper adjustment
of
other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation
.
-
If the product has been dropped or damaged in any way
.
-
When the product exhibits a distinct change in performance, this indicates a need for service.
REPLACEMENT PARTS:
When replacement
parts are required, be sure the
service technician has used replacement parts specified by the
manufacturer or that have the same
characteristics as the original part.
Unauthorized
substitutions could result in fire
,
electric shock, or other hazards.
SAFETY CHECK:
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper op
erating condition.
WALL OR CEILING MOUNTING:
The product should not be mounted to a wall or ceiling
.
HEAT:
The product should he situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
1
Содержание 614305
Страница 1: ...USER S MANUAL ...