Using USB Docking
After installing the docking station software, you are ready to connect USB Docking
to your computer.
1. Connect the supplied AC power adapter to the AC power jack on USB Docking.
2. Connect one end of the USB cable to USB Docking and the other end into an
available USB 2.0 port on your computer.
IMPORTANT:
USB Docking will not function properly without the AC adapter plugged into an AC
outlet. Do not connect any devices to USB Docking until the installation is completed.
Installing the Default Device Drivers
Once you connect the docking station to your computer, the default drivers begin
installing for each of the ports automatically.
NOTE: Please ensure you have the latest service packs installed.
Some hardware devices may prompt you to install the drivers.
To install the drivers:
1. Select “
Install the software automatically (Recommended)”
and click Next.The
Found
New Hardware Wizard
program begins installing the hardware drivers.The
Completing the Found New Hardware Wizard screen appears.
2. Click Finish and repeat as needed for each device.
3. Restart your computer.
