3
INSTALLATION
Perform the following steps to install this KVM switch.
1.
Using one of the included cables, plug one end into the USB Type-A
or Type-C™ port on your computer, then plug the other end into
one of the PC Ports. Repeat for the second computer.
2.
Plug up to four USB peripherals into the USB 3.1 Gen 1 Ports on the
switch.
3.
Plug the included Remote Port Selector into the Remote Port
Selector Jack on the switch.
4.
(Optional) Using a Micro USB cable (not included), plug one end into
the Micro USB Power Port on the switch, then plug the other end
into a USB power source.
USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum,
Inc.
