7
Mounting Guidelines
If mounting to a wall, use a carpenter's level to ensure that the brackets are
mounted level with each other. For best results, draw an erasable line on the wall to
serve as a guide for the locations to mount the brackets.
If mounting to a ceiling, measure the distance from the wall to ensure that the
screen is parallel with the wall. For best results, mount the brackets flush with the
wall.
Use a pencil to mark the drill holes through the bracket. Use a carpenter's level to
check that the marked drill holes are level if mounting to a wall. Otherwise, measure
the marked drill holes from the wall to ensure that the screen will be parallel with
the wall.
If mounting to wood studs, drill a 4mm pilot hole 40mm deep into the stud.
If mounting to a concrete wall or ceiling, drill 5mm anchor holes 40mm deep into
the concrete, then insert the anchors.
If you wish to suspend the screen from the ceiling, you will need to obtain the
hardware for the suspension points and the suspension cable/chain.
If suspending the screen from the ceiling, measure the distance for the mounting
points from the wall to ensure that the screen is parallel with the wall.
Always take care when mounting the screen to properly secure the brackets and
screen to the wall or ceiling. An unsecure installation can result in the screen