4
residential installations, while a riser or plenum rating is required for commercial
installations. Please refer to your local building regulatory agency for guidance.
Do not place or install this device in an area where it can be exposed to excessive
amounts of dust, humidity, oil, smoke, or combustible vapors.
When it is extended, take care not to shake the screen or attempt to manually lift it
up.
This device has no user serviceable parts. Do not attempt to repair or disassemble
this device.
The motor requires no periodic lubrication.
Power
Remove power from the AC circuit prior to wiring the motor to the circuit by
turning off the circuit breaker or the main power switch to the building.
This device requires a grounded/earthed power connection for safe operation.
If using a fixed electrical connection (directly wired to a power source), install a
quick disconnect device inline where it can be readily accessible. If using a standard
AC power plug, ensure that the power outlet is readily accessible so that power can
be removed in the event of an emergency.
All wires and cables installed inside the ceiling must be rated for in-wall/in-ceiling
use by the UL or a similar certification agency. An in-wall rating is sufficient for
residential installations, while a riser or plenum rating is required for commercial
installations. Please refer to your local building regulatory agency for guidance.
Unplug this device from the power source when not in use.
Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.