Monoprice 27841 Скачать руководство пользователя | Manualshive

Страница: 17 / 49

background image

17

By default, the matrix will use the EDID information from the display connected to output
1, but it may have a higher maximum resolution than another connected display, which
would prevent the other display from displaying video. To overcome this problem, this
matrix includes advanced EDID management. There are two methods for setting the EDID
information for the connected source devices. The first method is to copy the EDID
information from one of the connected displays to one or more of the source devices. The
second method is to assign a predefined EDID setting for one or more sources.
Note that by default, when copying the EDID information from one of the outputs, the
matrix will copy the EDID information from the display connected to the HDBaseT™
receiver, not from the local display connected with an HDMI® cable. If you want to copy
the EDID information from the local display instead of the display connected to the
HDBaseT receiver, disconnect the Ethernet cable from the HDBaseT output.
To copy the EDID information from one display to one source, first press the EDID button,
then press an INPUT button followed by an OUTPUT button, and finally press the ENTER
button to confirm. For example, to copy the EDID information from output 4 to source 2,
press the EDID button, then press the INPUT 2 button followed by the OUTPUT 4 button,
and finally press the ENTER button. The EDID, INPUT 2, OUTPUT 4, and ENTER buttons will
blink 3 times.
To copy the EDID information from one display to all sources, first press the EDID button,
then press the ALL button followed by an OUTPUT button, and finally press the ENTER
button. For example, to copy the EDID information from output 4 to all sources, first press
the EDID button, then press the ALL button followed by the OUTPUT 4 button, and finally
press the ENTER button. The EDID, ALL, OUTPUT 4, and ENTER buttons will blink 3 times.
The following table shows the seven predefined EDID settings.

ID

Video Resolution

Audio Formats

1

720p 2D

PCM, Dolby®, DTS®

2

720p 3D

PCM, Dolby, DTS

3

1080p 2D

PCM, Dolby, DTS

4

1080p 3D

PCM, Dolby, DTS

5

4K@30Hz

PCM, Dolby, DTS

«
...
15
16
17
18
19
...
»

Содержание 27841


















































Отзывы:

Нет отзывов

Похожие инструкции для 27841

Бренд: Kambrook Страницы: 8

Classic Osterizer

Бренд: Oster Страницы: 40

Push Button Blenders

Бренд: Oster Страницы: 8

Home Booster 3.0 Bar

Бренд: Grundfos Страницы: 2

Бренд: Gefen Страницы: 18

DVI Audio Extender

Бренд: Gefen Страницы: 16

Бренд: J-Tech Digital Страницы: 3

Бренд: Xantia Страницы: 30

Бренд: Hung Страницы: 7

AC-EX100-444-KIT-GEN

Бренд: AVProEdge Страницы: 23

AdderLink XD522

Бренд: ADDER Страницы: 2

Бренд: Bosch Страницы: 96

Бренд: Optimum Страницы: 12

MQ777 Multiquick 7

Бренд: Braun Страницы: 104

Бренд: gofanco Страницы: 12

Бренд: HealthMaster Страницы: 16

DigitaLinx DL-1H1A1U-B

Бренд: LIBERTY AV SOLUTIONS Страницы: 8

Draco vario DisplayPort 1.1 483 Series

Бренд: Ihse Страницы: 126

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды