14
Control Local Input Device From Remote
The same basic principle applies when controlling the local input device from the remote
location. For example, if you have HDMI® input 3 connected to HDBaseT™ output 4, plug an
IR receiver into the IR IN jack on the receiver, then plug an IR transmitter into IR OUT 3 on
the matrix, as shown in the diagram below.
Similarly, you can control all local input devices by plugging an IR transmitter into the IR
OUT ALL OUT jack on the matrix. In this case, you must have an IR receiver plugged into the
IR IN jack on each of the connected HDBaseT™ receivers, as shown in the diagram below.
