7
4.
IR EXT: 3.5mm jack for connecting one of the included IR receivers in case the front
panel IR "eye" is obstructed.
5.
EDID: Four DIP switches for setting the EDID behavior.
6.
POWER: DC barrel connector for connecting the included AC power adapter.
7.
POWER SWITCH: Toggle switch for turning the matrix on or off.
Receivers
1.
IR IN: 3.5mm jack for connecting one off the included IR receivers for controlling the
source devices from the remote location.
2.
POWER LED: The LED illuminates when the receiver is receiving power over the
Ethernet cable.
3.
CAT: RJ45 jack for connecting the Cat6 Ethernet cable from the matrix/extender.
4.
LINK LED: The LED illuminates when the receiver is receiving a stable HDMI® signal
over the connected Ethernet cable.
5.
HDMI OUT: HDMI port for connecting a video display.
